JUMO 707050 dTRANS T05 - Programmable 2-Wire Transmitter Operating Manual - Manual (Page 71)

33
6 Appendix
6.1.8 Case
IP protection type
In terminal head, form B IP54/IP65 (depending on the version)
Open assembly IP00
On DIN rail IP20
a
All specifications refer to the measuring range end value of 20 mA or 10 V
b Under calibration conditions
c
% refer to the set measuring span. The greater value of the long-term stability applies.
707050 707051
707050 707051
Material Polycarbonate UL 94 V2 (grouted) Polybutylene terephthalate UL 94 V0
Terminal type Screw terminals: Screw terminals:
Wire type Rigid and flexible wires Rigid and flexible wires
 1.75 mm²; 0.2 mm² to 2.5 mm²
AWG/kcmil min. 26, max 12
Stripping length 12 mm
Max. torque 0.6 Nm Torque 0.5 - 0.6 Nm
Spring-cage terminals
Rigid and flexible wires
0.2 mm² to 2.5 mm²
AWG/kcmil min. 26, max 12
Stripping length 8 mm
Assembly type In terminal head, form B (DIN EN
50446); On DIN rail TH 35-7.5
In the surface-mounted case (see
accessories); Or TH 35-15 (DIN EN 60715);
In the control cabinet
(mounting element required)
Installation position Any
Weight ~ 35 g ~ 50 g