Klein Tools VDV501-823 - Manual (Page 13)

13
ENGLISH
WIRING AND DISPLAY EXAMPLES
Coax Cable Properly Wired:
Coax Cable Properly Wired with ID Remote #1: The #1 ID remote is used to terminate a properly wired coax cable. The video test passes,
ID #1 is detected, and the "o"s across the bottom of the screen show that the tester is running tests continuously.
Coax Cable with an Open:
Coax Cable with an Open: There is a break in the cable continuity. A break in the shield or in the center wire can cause an open fault. The
cable does not pass and the ID remote number on the other end of the cable cannot be determined.
Coax Cable with a Short:
Coax Cable with a Short: The center wire of the cable is connected to the shield, creating a short. The cable does not pass and the ID remote
number on the other end of the cable cannot be determined.