English – Klein Tools VDV501-823 User Manual
Page 14
14
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-800-553-4676
www.kleintools.com
CUSTOMER SERVICE
ENGLISH
1.
Remove single screw in the middle of the back of the VDV Scout
®
Pro 2 with a #1 Phillips head screwdriver.
Remove battery door.
2.
Disconnect battery cable and recycle exhausted battery.
3.
Acquire a 9 volt alkaline battery (IEC 6LR61, ANSI/NEDA 1640A).
4.
Connect battery cable to new battery observing polarity and place into battery compartment.
5.
Replace battery door and screw, taking care not to over-tighten it.
WARRANTY
www.kleintools.com/warranty
CLEANING
Turn instrument off and disconnect any cables. Clean the instrument by using a damp cloth. Do not use abrasive cleaners
or solvents.
STORAGE
Remove the batteries when instrument is not in use for a prolonged period of time. Do not expose to high tempera-
tures or humidity. After a period of storage in extreme conditions exceeding the limits mentioned in the Specifications
section, allow the instrument to return to normal operating conditions before using it.
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with
local regulations.
Prior to disposal of this product, please contact Klein Tools for proper disposal options.
BATTERY REPLACEMENT