Landoll 4630-36 Folding Seeder Operators Manual v.F-640-0313 03/2013 - Manual (Page 22)

4-4 F-640-0313 Edition
OPERATION AND MAINTENANCE
Transport Locks
1. Transport lock pins are provided to secure the
Seeder Hitch in raised and folded positions. Do not
rely totally on hydraulics when working beneath
raised equipment.

WARNING
Figure 4-2: Telescoping Hitch Transport Lock
2. To install the telescoping hitch transport lock, fully
raise the main lift and hitch. Remove the pin from the
storage position and install through the hole in the
telescoping hitch (See Figure 4-2.) Leave the weight
of the seeder on the hydraulic system while
transporting. The pin will prevent any uncontrolled
dropping of the hitch.
3. After folding the seeder and raising the hitch, the
transport lock pin may be inserted in either hole of
the wing fold lock over the top of the hitch (See
Figure 4-3.) This will insure the fold locks do not
come apart while transporting. Before unfolding the
seeder remove the transport lock pin and install in
the storage position of either wing fold lock.
Figure 4-3: Folded Seeder Transport Lock
Install transport lock pins before attempting to
service, adjust, or transport raised equipment.
TRANSPORT LOCK
PIN IN STORAGE
POSITION
TRANSPORT LOCK
PIN IN INSTALLED
POSITION
5530-translock2
TRANSPORT LOCK
PIN INSTALLED
FOR TRANSPORT
TRANSPORT LOCK
PIN INSTALLED FOR
STORAGE
36’Seeder Hitch-translock