Landoll SL/SLB/SLP/SLPB/SLPB TURFMAKER III - Manual (Page 32)

2-22 1P124
ASSEMBLY INSTRUCTIONS

CAUTION
Figure 2-29: Rear Seedbox Addition (2 of 4)
Support seedboxes at all times to prevent
bending seed shafts.
6. Remove LH seed
box mount plate on
transmission and
replace with RH
mount plate.
5. Remove left seedbox far enough to mount plate. NOTE: Complete removal
is not required. Slide seed box to the right; seed shaft will slide in 37-tooth
sprocket and bearing (Step 6).
7. Install rear seedbox
drive coupling on
transmission shaft.
8. Remove all bolts from rear seed deflectro r
shields. Turn shields so the top lip angles
rearward, re-install and tighten all bolts.
REMOVE