Landoll SL 8, 10, 12 Turfmaker Seeder - Manual (Page 44)

3-12 1P342
OPERATION
Electric Clutch Kit - Optional,
continued
3. Install switch on tractor in a convenient location with
the velcro included or other type of mount (not included).
4. Attach wire lead to power source and secure wire.
5. Check clutch operation. Clutch will disengage when
power is applied. (Clutch will make a clicking sound). Set
seeder on the ground and drive a short distance while
turning switch on and off. The seed cup shaft will stop
rotating when the switch is turned to the “OFF” position.
6. Turn switch to the “ON” position when seeder is not
used to shut off power to prevent possible overheating of
clutch coil.