Landoll XL144/XLC144/XLD144/XLH144/XLO144 X-Fold Pulverizer User Manual
Page 12
Advertising
5J801
182rev501
Page 7A
MAINTENANCE
Fasteners
After a few hours of use check entire machine and tighten any loose nuts or bolts. Daily or periodic checks
should be made thereafter.
Tires For Dual Wheel Pulverizers
Recommended size of four tires are: 9.5L x 15 6 ply inflated to 28 psi or 11L x 15 6 ply inflated to 28 psi.
Lubrication
Grease zerk fittings daily. Locations are:
Transport axle bearings (bottom) - - - - 3
Hinge pins - - - - - - - - - - - - - - - 4 (2 per hinge)
The above items are not sealed and cannot be overgreased.
Wheel bearings should be repacked annually.
When Pulverizer is not used for some time, exposed cylinder rods should be cleaned and covered with a thick
coat of grease. This will prevent corrosion which will damage seals.
Advertising