Landoll XL144/XLC144/XLD144/XLH144/XLO144 X-Fold Pulverizer User Manual
Page 5
5J801
182rev501
INTRODUCTION
Your Brillion Pulverizer is built with the best materials and workmanship available. It has been designed to
give years of trouble-free operation. Proper care and operation will insure that you receive the service and
long life built int this machine.
Study this manual carefully before attempting to assemble or operate the machine. A special section, “Setting
Up Instructions”, is included.
This safety alert symbol is used to call your attention to instructions concerning
personal safety. Federal law requires you to explain the safety and operating
instructions furnished with this machine to each employee before they are allowed
to operate the machine. These must be repeated to the employee at the start of
each season. Be sure to observe and follow the instructions for the safety of
anyone operating or near the machine.
Location Reference
Right hand, left hand, forward and rear refer to operator’s right, left, front and rear when he faces the same
direction as the machine will travel in the field.
Parts Ordering
When ordering parts for this machine, include the complete model number and serial number. Refer to the
name plate on the angled tube above the drawbar, left side, center section of the machine as indicated in the
diagram below. Please record these numbers upon taking delivery of the unit.
Pulverizer Model No.
_______________________________
Serial No.
_______________________________
Date Purchased_______________________________
Be sure to read the warranty card which is shipped with the machine. Return the proper portion of the card for
recording at the factory.