Leica Biosystems ASP300 - Manual (Page 41)

41 Leica ASP300
5. Operation
5.2.4 Adding and/or modifying programs
Creating a new program
• You must be logged on at supervisor level.
• In the VIEW/EDIT PROGRAMS screen ( Fig. 20 ) highlight a program as
similar as possible to the program you wish to create.
• Press COPY to copy the selected program.
The new program will have the same name as the program copied,
however, the figure “(2)“ will be added.
• Highlight the line containing the new program.
• Press PROGRAM NAME.
• Enter the new program name.
Editing program steps
• Press EDIT (refer Fig. 20 ) to access the PROGRAM STEPS screen.
• In the headline you will find the PROGRAM NAME.
• The colors on the left border of the table indicate the reagent groups
to which the reagent of the step belongs.
• The program steps (max. 13 steps per program) are displayed in the
order in which they are carried out.
The following characteristics can be edited:
• reagent name
• duration of step
(with the exception of fill and drain steps)
• retort temperature
(if “Ambient“ is selected, the retort temperature indication remains
empty)
• type of pressure and/or vacuum cycle
• retort drain time
• delay step.