Lenze SDSGA - Manual (Page 12)

Safety instructions
Definition of notes used
2
l
12 BA 13.0008 − EN 2.1
7. Inverter−driven operation for asynchronous motors
The indications in the terminal box inform about the limit values for the voltage that may
be permanently applied to the insulation system of the motor. Example: SDSGA series.
Permissible voltage:
û
v 1.5 kV
dv / dt
v 5 kV / ms
2.4 Definition of notes used
The following pictographs and signal words are used in this documentation to indicate
dangers and important information:
Safety instructions
Structure of safety instructions:
}
Danger!
(characterises the type and severity of danger)
Note
(describes the danger and gives information about how to prevent dangerous
situations)
Pictograph and signal word Meaning
{
Danger!
Danger of personal injury through dangerous electrical voltage.
Reference to an imminent danger that may result in death or
serious personal injury if the corresponding measures are not
taken.
}
Danger!
Danger of personal injury through a general source of danger.
Reference to an imminent danger that may result in death or
serious personal injury if the corresponding measures are not
taken.
(
Stop!
Danger of property damage.
Reference to a possible danger that may result in property
damage if the corresponding measures are not taken.
Application notes
Pictograph and signal word Meaning
)
Note! Important note to ensure troublefree operation
I
Tip! Useful tip for simple handling
,
Reference to another documentation