Lenze SDSGA - Manual (Page 15)

Technical data
General data and operating conditions
3
l
15 BA 13.0008 − EN 2.1
3.2 General data and operating conditions
Field Values
Conformity CE Low−Voltage Directive (73/23/EEC)
Climatic conditions Average relative humidity 85 %, without condensation
Permissible
temperature range Non−ventilated or with integral
fan without brake or with
spring−operated brake −20 °C ... +40 °C Without power derating, above
+40 °C with power derating see
catalog
Protection type See nameplate Protection types only apply for
horizontal installation
Thermal class F (155 °C) to DIN−IEC 34 / VDE 0530 The insulation will be weakened or
destroyed when the limit
temperature is exceeded
Tropical insulation Not guaranteed
Permissible voltage 1.5 kV peak value 5 kV/ ms rate of rise
Vibration Up to 2.0g / 20m/s 2 without resonance excitation, e.g. of the fan.
Mounting positions Can be used in all mounting positions Vertical arrangements to DIN−IEC
34 part 7 are possible if they meet
the designs
Motors with directly mounted
gearbox must not be mounted in
mounting position with motor at
the bottom
Permissible installation
height h h £ 1000 m amsl
1000 m amsl < h £ 4000 m amsl
Without power derating
With power derating, see catalog