Lenze SDSGA - Manual (Page 7)

Preface and general information
Legal regulations
Scope of supply
1
l
7 BA 13.0008 − EN 2.1
1.2 Legal regulations
Labelling Nameplate Manufacturer
Lenze products are clearly labelled and defined by the
indications on the nameplates. Lenze GmbH & Co KG
Kleinantriebe
Postfach 10 13 52
D−31763 Hameln
Application as
directed Drive products
l must only be operated under the conditions prescribed in these Instructions.
l must only be used for the ordered and acknowledged application conditions.
l meet the protection requirements of the EC "Low−Voltage Directive".
l are not machines in the sense of the EC Machine Directive.
l must not be used at powers higher or lower than indicated in these Instructions.
Drive systems with SDS motors
l meet the EC Directive "Electromagnetic compatibility" if they are installed according to the specifications
of the CE−typical drive system.
l are applicable:
– on public and non−public mains,
– in industrial as well as residential and commercial premises.
l The end user is responsible for adhering to the EC directives in the machine application.
Any other use shall be deemed inappropriate!
Liability l The information, data, and notes in these instructions were up to date at the time of printing. Claims
referring to motors which have already been supplied cannot be derived from the information, illustrations
and descriptions.
l The process−related notes and circuit sections used in these instructions are suggestions whose suitability
for the respective application must be checked. Lenze assumes no guarantee for the suitability of the listed
procedures and circuit samples.
l These operating instructions describe the product features without guaranteeing them.
l No liability shall be accepted for damage and downtimes resulting from:
– non−observance of the operating instructions
– unauthorised changes or modifications to the motors
– operating errors
– improper work on and with the motors.
Warranty l Terms of warranty: see terms of sales and delivery of Lenze GmbH & Co KG Kleinantriebe.
l Warranty claims must be made to Lenze immediately after detecting the deficiency or fault.
l The warranty is void in all cases in which liability claims cannot be made.
Disposal Material Recycle Dispose
Metal D −
Plastic D −
Assembled PCBs − D
In−house
transport l Transport the motors free of vibration.
l Avoid heavy shocks.
l If possible, use manufacturer’s packaging for transport.
Cushioned bag ensures:
– dust protection
– moisture protection
– mechanical protection
Storage
conditions l Storage:
– free of vibration
if a certain risk of vibration exists, we recommend to rotate the rotor once per week
– dry, in a non−aggressive environment
– free of dust
– free of extreme temperature changes
l Corrosion:
– Steel parts are corrosion−protected when being delivered. Do not remove the protection! Check it every
three months and, if necessary, renew it.