1 mechanical installation, Mechanical installation, Mounting for standard devices 0.25 kw and 0.37 kw – Lenze E84AYCER User Manual
Page 23: E84aycer communication manual (profinet)
EDS84AYCER EN 2.0 - 11/2010
L
23
E84AYCER communication manual (PROFINET)
Installation
Mechanical installation
5.1
Mechanical installation
When the controller is switched-on, the communication module can be plugged into the
MCI slot or removed from there. During the process of being plugged in, the module is
automatically detected and its functions and version are checked for plausibility.
5.1.1
Mounting for standard devices 0.25 kW and 0.37 kW
[5-1]
Mounting for standard devices 0.25 kW and 0.37 kW
Mounting steps
1. Use a screwdriver to open the cover of the MCI slot of the standard device and remove
it (1, 2).
2. Loosen the securing screw for the communication module on the standard device (3).
3. Insert the communication module into the MCI slot of the standard device (4).
4. Tighten the securing screw again (5).
E84YCPM002D