Ethercat connection, Electrical installation – Lenze E94AYCET User Manual
Page 37
![background image](/manuals/565762/37/background.png)
Electrical installation
EtherCAT connection
EDK94AYCET DE/EN/FR/ES/IT 5.0
37
l
H2_EtherCATAnschluss−Ethernet_KabelSpezifikation
EtherCAT connection
You can use a standard Ethernet patch cable for connection to the communication module
(see "Ethernet cable specifications" (
)
Note!
Plug/remove the Ethernet cable plug vertically into/from the socket to make
sure that the RJ45 socket will not be damaged.
Pin assignment
RJ45 socket
PIN
Signal
1
Tx +
2
Tx −
3
Rx +
4
−
5
−
6
Rx −
7
−
E94AYCXX004C
8
−
I
Tip!
The EtherCAT interfaces are equipped with an auto−MDIX function. This
function adapts the polarity of the RJ45 interfaces such that independently of
the polarity of the opposite EtherCAT interface and the cable type used
(standard patch cable or crossover cable) a connection is established.