Lenze E94AZRS0294 - Manual (Page 46)

5 Mechanical installation
Standard mounting
EDK94AZRS DE/EN/FR/ES/IT 6.0
46
l
H1_MechINS−Fi NbMontage_GG2−3_EN
Installation steps
5 mm
SSP94NF004
How to proceed for standard mounting:
1. Prepare M5 threaded holes on the mounting plate, for instance according to the
mounting grid.
– Always use all mounting points specified.
2. Tightly screw together filter and mounting base.
Screws Tightening torque
E94AZxS0044
2 x M5x20
3.4 Nm (30 lb−in) E94AZxS0104
E94AZxS0294 2 x M5x25
3. Under limited space conditions, filter and mounting base can be connected
electrically. ( ^ 50)
4. Screw the filter onto the mounting plate.
– Use M5 screw and washer assemblies or M5 hexagon socket screws with washers.
– If further devices are to be mounted directly adjacent on the right−hand side of the
filter, do not tighten the screws fully before all devices are mounted and aligned.
– Tightening torque: 3.4 Nm (30 lb−in).