Lenze g700 Planetary gearboxes with servo - Manual (Page 11)

Commissioning and operation
Important notes
5
EN
11 Lenze ¯ MA 12.0015 ¯ 1.0
5 Commissioning and operation
5.1 Important notes
(
Stop!
The drive may only be commissioned by skilled personnel!
¯ Take safety measures prior to any operation:
– Disconnect the machine from the mains, ensure standstill of the drive system
and avoid any machine movement.
5.2 Before switching on
Please check:
¯ Drive function - machine function assignment
¯ The direction of rotation of the drive shaft
g700 with servo motor
¯ Does the drive appear undamaged?
¯ Is the mechanical fixing o.k.?
¯ Is the electrical connection correct?
¯ Are all rotating parts and surfaces that may become hot protected against
contact?
5.3 During operation
During operation, check the drive periodically and take special care of:
¯ changes compared to normal operation, like
– unusual noise, stronger vibrations or increased temperatures,
– leakages,
– loose fixing elements,
– the condition of the electrical cables.
¯ In case of faults:
– shut down the drive,
– check the troubleshooting table.
If the fault cannot be remedied, please contact the Lenze customer service.