Lenze g700 Planetary gearboxes with servo - Manual (Page 9)

Mechanical installation
Important notes
4
EN
9 Lenze ¯ MA 12.0015 ¯ 1.0
4 Mechanical installation
4.1 Important notes
¯ Use load carrying equipment for transport!
¯ Before the transport
– check that all components are safely mounted,
– fasten all transport aids (eye bolts or support plates).
¯ Transport the drive only with means of transport or hoists with a sufficient load
capacity.
¯ Ensure secure fastening.
¯ Prevent shocks!
}
Danger!
Danger due to toppling or falling loads!
¯ The payload of the hoists and load handling devices must at least
correspond to the weight of the load.
¯ The load must be secured in such a way that it cannot topple or fall
down.
¯ Do not stay under a pending load!
4.2 Means of transport for gearboxes
}
Danger!
The motors attached to the gearbox are partially equipped with eyebolts.
These are exclusively determined for mounting/dismounting the motor
to the gearbox and must not be used for the complete geared motor!
(
Stop!
Observe load carrying capacity!
Staying under floating load is prohibited!