Lenze EMF2174IB - Manual (Page 8)

Preliminary works
Important notes
EDK2174DB DE/EN/FR 3.0
8

H2WichtHinw-Codierung_DIP_en
Important notes
Two codings are possible:
ƒ by connections within a Sub-D plug (
9 )
ƒ by setting two DIP switches inside the CAN addressing module ( 10 )

Note!
ƒ The Sub-D plug settings have a higher priority than the DIP switch settings.
ƒ ”EER” trip is released in the controller if
– the Sub-D plug is removed during operation,
– an invalid controller address has been coded,
– an invalid baud rate has been coded.