Lenze E82ZN - Manual (Page 26)

Safety instructions
Residual hazards
2
l
26 EDK82ZN903 DE/EN/FR 5.1
(
Stop!
Heavy device weight
The device is very heavy and must be lifted for the mounting.
Possible consequences:
ƒ Injury to persons, particularly backache when lifting and holding the device,
respectively
ƒ Injury to persons and damage to material assets due to the device falling
down
Protective measures:
ƒ The device must only be carried with a load bearing system such as an
indoor crane permitted for the device weight
ƒ Before the transport, the hoist, the load bearing system and lifting
accessories must be checked for sufficient payload and faultless status
ƒ Do not remove the hoist and the lifting accessories until the device lies safe
on a stable surface or is finally mounted.
O
Warnings!
Conditions of Acceptability:
ƒ The products covered by this report are intended for use with Power
Conversion Equipment (inverters) only.
ƒ Appropriate cooling measures shall be taken based on the power loss data
within the instructions available from the manufacturer.
ƒ In the end−use application the wiring leads shall be protected from strain
relief and push back forces, mechanical damage and be routed away from
sharp edges, screw threads and the like, that can abrade the wire insulation.