Lenze E82xV113Kxxxxx - Manual (Page 12)

Safety instructions
Residual hazards
1
l
12 EDK82EV113 EN 4.0
Protection of the machine/system
ƒ Drives can reach dangerous overspeeds (e. g. setting of high output frequencies in
connection with motors and machines not suitable for this purpose):
– The drive controllers do not provide protection against such operating conditions.
For this purpose, use additional components.
J
Warnings!
ƒ The device has no overspeed protection.
ƒ Must be provided with external or remote overload protection.
ƒ Suitable for use on a circuit capable of delivering not more than 5000 rms
symmetrical amperes, 240 V maximum (240 V devices) or 500 V maximum
(400/500 V devices) resp.
ƒ Use 60/75 °C or 75 °C copper wire only.
ƒ Shall be installed in a pollution degree 2 macro−environment.