Lenze E82xV113Kxxxxx - Manual (Page 18)

Parameter setting
Parameter setting with E82ZBC keypad
Menu structure
2
l
18 EDK82EV113 EN 4.0
2.1.4 Menu structure
For easy operation, the codes are grouped into two menus:
ƒ The user menu
– is active after every mains switching or after connection of the keypad during
operation.
– contains all codes for a standard application with linear V/f characteristic control
(Lenze setting).
– can be modified as required under C0517.
ƒ The all menu
– contains all codes.
– shows a list of all codes in numerically ascending order.
The
user menu − the 10 most important drive parameters at a glance
After every mains switching, or after connection of the keypad during operation, the 10
codes that have been defined in code C0517 are immediately available.
In the Lenze setting, the user menu contains all codes required for starting up a standard
application with linear V/f characteristic control: