Key for overview, Interfaces and displays – Lenze E82xV113Kxxxxx User Manual
Page 6
Key for overview
Position
Description
0
8200 vector frequency inverter
1
Support for standard fixing
2
EMC shield sheet with shield clips for the motor cable and for the motor temperature monitoring feed cable
3
2−pole terminal strip for motor PE and motor shield at X2.1
4
EMC shield sheet with fixing screws and shield clamp for shielded control cables
5
Plug connector 2 × 13−pole for function modules on FIF interface
X1.1
Mains connection and DC supply
(integrated terminal strip)
X1.2
Terminal strip for relay output
X2.1
Motor connection, connection brake resistor (option)
(integrated terminal strip)
X2.2
Terminal strip for PTC connection or thermal contact (NC contact) of the motor
X3.1
Special design:
terminal strip for feedback contact − only for "safe standstill" E82EVxxxKxCx4x variant
Interfaces and displays
Position
Description
Function
2 light−emitting diodes (red, green)
Status display
AIF interface
(automation interface)
Slot for communication module
keypad E82ZBC, keypad XT EMZ9371BC
field bus modules type 21XX,
e. g. INTERBUS 2111, PROFIBUS−DP 2133, ...
FIF interface
(function interface)
With cover for the operation without function module
or slot for function module
standard I/O E82ZAFSC
application I/O E82ZAFAC
fieldbus function modules type E82ZAFXC,
e. g. INTERBUS E82ZAFIC, PROFIBUS−DP E82ZAFPC, ...