Lenze Global Drive PLC Developer Studio - Manual (Page 103)

Drive PLC
Appendix
8.6 Code table
8−23
L
DrivePLC DE 6.0
Code Info Possible settings LCD Code Info
Selection Lenze
LCD
C0381 HeartProTime 0 System bus: Heartbeat (slave): HeartbeatProducerTime
Time interval for sending the Heartbeat message.
·
Only relevant for setting C0352 = 3.
·
Additional information about the "heartbeat" function
can be found in the Manual for the function library
LenzeCanDSxDrv.lib.
0 {1 ms} 65535
C0382 GuardTime 0 System bus: Node Guarding (slave): NodeGuardTime
Time interval for the status check of the master.
·
Only relevant for setting C0352 = 4.
·
Additional information about the "node guarding"
function can be found in the Manual for the function
library LenzeCanDSxDrv.lib.
0 {1 ms} 65535
C0383 LifeTimeFact. 0 System bus: Node Guarding (slave): NodeLifeTime factor
Factor for the NodeLifeTime monitoring time:
NodeLifeTime = C0383 x C0382 (NodeGuardTime)
·
Only relevant for setting C0352 = 4.
·
Additional information about the "node guarding"
function can be found in the Manual for the function
library LenzeCanDSxDrv.lib.
0 {1} 255
C0384 Err NodeGuard 3 System bus: Node Guarding (slave):
Response to a NodeGuard event.
·
Only relevant for setting C0352 = 4.
·
Additional information about the "node guarding"
function can be found in the Manual for the function
library LenzeCanDSxDrv.lib.
0 TRIP
1 Message
2 Warning
3 Off
4 Fail−QSP
C0400 DIS: OUT
g
Analog inputs
−199.99 {0.01 %} 199.99
1 AIN1_nIn_a
2 AIN2_nIn_a
3 AIN3_nIn_a
C0405 DIS: OUT
g
Extension board 3: Analog inputs
−199.99 {0.01 %} 199.99
1 AIN4_nIn_a
2 AIN5_nIn_a
C0425 DFIN const 3 Extension board 3: DFIN_IO
Increments of the encoder input
0 256 inc/rev
1 512 inc/rev
2 1024 inc/rev
3 2048 inc/rev
4 4096 inc/rev
5 8192 inc/rev
6 16384 inc/rev
C0426 DIS: OUT g Extension board 3: DFIN_IO
DFIN_nIn_v
−32767 {1 rpm} 32767
C0428 DFIN TP sel. 0 Extension board 3: DFIN_IO
Touch probe selection
0 Touch probe via zero pulse
1 Touch probe via digital input X3/I1