Lenze EPM-H312 - Manual (Page 56)

Operation
Calling up information messages
6

56 EDBPM-H312 DE/EN/FR 2.0
6.3 Calling up information messages
ƒ Information messages
– are texts which appear because of a certain event (e.g. if an actual value
exceeds a limit),
–
can only be called up as long as the triggering event is active.
– must have been programmed in the ”HMI Designer” planning tool.
– can have a maximum length of 4 lines at 20 characters each.
ƒ The operating unit does not indicate whether an information message is
available or not.
If you want to ... Touch the fields... Example
A ... call up an information message.
Help
Esc
Pressure exceeds saftey
limit
B ... select the next information
messages.
F1
or
F2
Water level below working
treshold
C ... close the information messages.
Help
Esc
6.4 Calling up help messages
ƒ Help messages
– can be assigned to page or information messages.
– contain useful notes to make handling easier.
– must have been programmed in the ”HMI Designer” planning tool.
ƒ The operating unit does not indicate whether a help message is available for
a page or an information message.
If you want to ... Touch the fields... Example
A ... call up a help message.
shift + Help
Esc
B ... close a help message.
Help
Esc