Lenze EPM−H315 - Manual (Page 60)

Commissioning
Project transfer to the operating unit
Connecting operating unit and PC
5
l
60 EDBPM−H315 DE/EN/FR 7.1
5.2 Project transfer to the operating unit
5.2.1 Connecting operating unit and PC
(
Stop!
Only connect PC and operating unit when the units are switched off!
l
HMI Designer
1 0 2
INPUT VOLTAGE: 18-32VDC 15W
FUSE 800mA
LCD adj.
1 2 3
N.C. 24VDC
4
ASP8
N.C. CAN+ Shield CAN- V-
1 2 3 4 5
h315_005
Fig. 5−1 Connecting operating unit and PC
1. Plug the programming adapter EPZ−H111 0 onto the ASP8 interface.
2. Connect download cable EPZ−H110 1 to programming adapter EPZ−H111 0 .
3. Plug download cable EPZ−H110 1 onto COM1 or COMx 2 at PC.