Lenze EPM−H315 - Manual (Page 67)

Operation
Calling up information messages
6
l
67 EDBPM−H315 DE/EN/FR 7.1
6.3 Calling up information messages
ƒ Information messages
– are texts which appear because of a certain event (e.g. if an actual value
exceeds a limit),
– can only be called up as long as the triggering event is active.
– must have been programmed in the HMI Designer" planning tool.
– can have a maximum length of 2 lines × 20 characters.
ƒ The second to last line contains a programmable message field. This field
indicates the numerical size of the variable that has activated the
message.
ƒ The LED in the Info key will flash if an information message is available.
If you want to ... Press keys ... Example
A call up an information message.
l Information messages called up for the first
time are marked by **.
Info Druck uebersteigt
die Sicherheitsgrenze
125.5
**
B select the previous or next information
message. PgUp or PgDN
Wasserstand unterhalb
der Arbeitsschwelle
40
C close the information message.
Clr
Esc
6.4 Calling up help messages
ƒ Help messages
– can be assigned to pages or information messages.
– contain useful notes to make handling easier.
– must have been programmed in the "HMI Designer" planning tool.
ƒ The LED in the Help key will flash if a help message is available.
If you want to ... Press keys ... Example
A call up a help message.
Help
B close a help message.
Clr
Esc