Lenze ERBSxxxRxxxx - Manual (Page 53)

Mechanical installation
Mounting steps
5
l
53 EDKRBS470R DE/EN/FR 8.0
5.2 Mounting steps
How to mount the brake resistor:
1. Select a suitable mounting location.
– The mounting location must always ensure the operating conditions
mentioned in the technical data; if required, additional measures must
be taken.
– Ensure unimpeded air circulation for heat dissipation.
2. Screw down the brake resistor at the mounting location.
– The mounting location and the mounting material must ensure the
permanent mechanical connection.