Lenze 6034 Brake chopper - Manual (Page 4)

2
Safety information
The equipment described is intended for use in industrial drive
systems.
This equipment can endanger life through rotating machinery and
high voltages, therefore it is essential that guards for both electrical
and mechanical parts are not removed.
The following points should be observed for the safety of the
personnel:
•
Only qualified personnel familiar with the equipment are
permitted to install, operate and maintain the devices
•
System documentation must be available and observed at all
times.
•
All non-qualified personnel must be kept at a safe distance
from the equipment.
•
The system must be installed in accordance with local
regulations.
A qualified person is someone who is familiar with all safety notes
and established safety practices, with the installation, operation and
maintenance of this equipment and the hazards involved. For more
detailed definitions see IEC 364.
These safety notes do not represent a complete list of the steps
necessary to ensure safe operation of the equipment. For further
information, please contact your nearest Lenze representative.
The information given in these Operating Instructions only apply to
the hardware and software versions that are indicated on the cover
page. If the version of your equipment is not listed these Operating
Instructions must not be used. Lenze cannot be held responsible for
any malfunction resulting from the above.
The specifications, processes and circuitry described in these
Operating Instructions are for guidance only and must be adapted
to your own specific applications. Lenze does not guarantee the
suitability of the processes and circuitry described in these
Operating Instructions for individual applications.
The specifications in these Operating Instructions describe the
features of the products without guarantee.
Lenze personnel have carefully checked these Operating
Instructions and the equipment described, but cannot be held
responsible for its accuracy.