Lenze EZN3x0030H110 - Manual (Page 40)

Mechanical installation
Mounting steps
5
l
40 EDKZNXXXX−002 DE/EN/FR 3.0
Designs 3 and 4
ƒ EZN3A0055H060
ƒ EZN3B0055H060
ƒ EZN3A0037H090
ƒ EZN3A0030H110
ƒ EZN3B0037H090
ƒ EZN3B0030H110
EZN−034b
How to mount the filter:
1. Read the chapter "Mechanical installation" in the documentation of the basic
device. Read up particularly on ...
– Precautionary measures while mounting
– Installation material required
– Compulsory starting torques
– Bore spacings and free spaces
2. If the filter is connected to the controller in push−through technique or cold−plate
technique, remove the bottom part
0 by releasing 6 screws.
3. Mount four fixing brackets
1 to the mains filter.
4. Mount the mains filter in the control cabinet.