Lenze EZN3x0030H110 - Manual (Page 44)

Electrical installation
Mounting steps
6
l
44 EDKZNXXXX−002 DE/EN/FR 3.0
Design 2
ƒ EZN3B0110H030
ƒ EZN3B0080H042
EZNx035b
How to wire the filter:
1. Deenergise the control cabinet and fuse it against re−energisation.
2. Connect the connection cables "Load"
2 to the basic device.
– Observe the mounting instructions of the standard device!
3. Connect the mains cables (L1, L2, L3, PE) to screw terminal "Line"
0.
– Observe tightening torque!