4 mounting steps, Mounting steps, Electrical installation – Lenze EZN3x0030H110 User Manual
Page 43
Advertising
![background image](/manuals/566202/43/background.png)
Electrical installation
Mounting steps
l
43
EDKZNXXXX−002 DE/EN/FR 3.0
6.4
Mounting steps
Design 1
ƒ
EZN3A0110H030
ƒ
EZN3A0080H042
EZNx035a
How to wire the filter:
1. Deenergise the control cabinet and fuse it against re−energisation.
2. Connect the connection cables "load"
2 to the basic device.
– Observe the mounting instructions for the basic device!
3. Attach the PE conductor to the PE stud
1 with the ring cable lug.
– Observe tightening torque!
4. Connect the mains cables to the screw terminal "line"
0.
– Observe tightening torque!
Advertising
This manual is related to the following products: