Lenze EZN3x0030H110 - Manual (Page 45)

Electrical installation
Mounting steps
6
l
45 EDKZNXXXX−002 DE/EN/FR 3.0
Design 3
ƒ EZN3A0055H060
ƒ EZN3B0055H060
EZNx035c
How to wire the filter:
1. Deenergise the control cabinet and fuse it against re−energisation.
2. Connect the connection cables "load"
2 to the basic device.
– Observe the mounting instructions for the basic device!
3. Attach the PE conductor to the PE stud 1 with the ring cable lug.
– Observe tightening torque!
4. Connect the mains cables to the screw terminal "line" 0.
– Observe tightening torque!