Lenze 8250 series Brake unit - Manual (Page 12)

Safety information
8250BA0903 2-1
2 Safety information
2.1 Personnel responsible for safety
Operator
• An operator is any natural or legal person who uses the
drive system or on behalf of whom the drive system is
used.
• The operator or his safety officer are obliged
- to check whether all relevant regulations, notes, and
laws are observed.
- to ensure that only qualified personnel work with and on
the drive system.
- to ensure that the personnel have the Operating
Instructions available for all corresponding operations
- to prohibit non-qualified personnel from working with
and on the drive system.
Qualified personnel
Qualified personnel are persons who are - because of their
education, experience, instructions, and knowledge about
corresponding standards and regulations, rules for the
prevention of accidents, and operating conditions - authorized
by the person responsible for the safety of the plant to perform
the required actions and who are able to recognize and avoid
potential hazards.
(see IEC 364, definition of qualified personnel)
Show/Hide Bookmarks