Lenze ApplicationTemplate PackML (PLC Designer R3-x) - Manual (Page 44)

Working with the ApplicationTemplate PackML
Assigning the module application (ModApp) to the task
44
Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
[8-2] Example: ModuleApp1 is assigned to the task with the highest priority Task_High.
• Confirm assignment by clicking OK.
The functions of the machine module can be programmed in the "State" methods of the single
operating modes.
States: States with predefined functions
[8-3] The states of the state machine contain a predefined programming
Each state of the state machine already contains a predefined programming.
• By double-clicking the prevailing state, the program code that contains the commented user
functions becomes visible.
• The comments point out where further functions can be added.