Lenze ApplicationTemplate PackML (PLC Designer R3-x) - Manual (Page 89)

Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014
89
Visualising in the ApplicationTemplate PackML
Adding a visualization: Standard procedure
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Go to Toggle color and enter the line
MVis.scVisuIntern.diFrame=Vis_eFrame.MVis_Module3
.
6. Go to OnMouseUp and change the ST code to
MVis.scVisuIntern.diFrame:=Vis_eFrame.MVis_Module3
:
10.3 Adding a visualization: Standard procedure
• The visualization must be added in the
A20 Visualisation folder:
Right-click the A20 Visualisation
folder and execute the following
command:
Add object Visualization
• Allocate the desired name of the
visualization.
Click Open.
• The visualization has been added in the
A20 Visualisation folder.
• Create a Frame in the visualization:
Create a frame from the Tools dialog
box via drag&drop.