Lenze ApplicationTemplate PackML (PLC Designer R3-x) - Manual (Page 50)

Working with the ApplicationTemplate PackML
Inserting an axis
50
Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4. Assign the name of the instance (example: MM_Dcl.Module2.App1) to the module
application:
5. Assign the axis to the module application. The precondition for this is that the actual
machine structure is mapped in the »PLC Designer« project.  Mapping the actual machine
structure: Add devices ( 38)
(The dwTestCounter input does not receive a transfer variable.)
• Select the desired axis (example: SM_Drive_ETC_9400HL)
• Click OK to insert the axis.
• The axis is connected to the machine module: