Lenze ApplicationTemplate PackML (PLC Designer R3-x) - Manual (Page 47)

Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014
47
Working with the ApplicationTemplate PackML
Removing machine modules
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.7 Removing machine modules
In order to remove a machine module including all instances from the »PLC Designer« project,
execute the
Delete command.

How to proceed:
Right-click the module name in the A70_MachineModuleSources folder and execute
the Delete command.
8.8 Module ID
• Each machine module can be identified by a unique CompID module ID which is stored in every
MFB of the machine module in each case.
• The module ID is defined in the BaseChannel and can be set by the setCompIDAndVersion()
method.
• The respective module ID (CompID) can be viewed in the visualisation under Machine Module
Details: Folder A20_Visualisation L_Main, Module List button .