Loadstar Sensors DI-1000U Digital Load Cell Interface Manual - Manual (Page 12)

DI-1000 Di1000 User Guide
Page: 12 / 25
P/N : 033-01591 Rev. 6
Table 1: Typical Load Cell Wiring Color Table
2.3 Special sensor grounding considerations
The DI-1000 has two ground pins, EARTH ground, and SIGNAL ground. Connection to both pins
should be carefully considered for each application. The very high accuracy possible using the DI-
1000 can easily be compromised with an incorrect connection to EITHER of these two pins!
Firstly, make sure you know how your load cell is wired! If your load cell has 4 wires and one
shield, that shield may be attached to the body of the load cell. Verify this with an ohm-meter or
continuity test! If your load cell has 6 wires, and two shield wires, one is the sensor body, the other
is the signal shield.
+Excitation
(+EX) -Excitation
(-EX) +Signal
(+SEN) -Signal
(-SEN) Shield
(Earth) +Sense
(+EXSENS) -Sense
(-EXSENS)
A&D
Engineering Red White Green Blue Yellow (Tie to +EX) (Tie to –EX)
Allegany Green Black White Red Bare (Tie to +EX) (Tie to –EX)
Beowulf Green Black White Red Bare (Tie to +EX) (Tie to –EX)
BLH Green Black White Red Yellow (Tie to +EX) (Tie to –EX)
Cardinal Green Black Red White Bare/Yellow (Tie to +EX) (Tie to –EX)
Digi Matex Red White Green Yellow Silver (Tie to +EX) (Tie to –EX)
Electroscale Red Black Green White Bare (Tie to +EX) (Tie to –EX)
Evergreen Green Black White Red Bare (Tie to +EX) (Tie to –EX)
General Sensor Red Black Green White Bare (Tie to +EX) (Tie to –EX)
HBM Green Black White Red Yellow (Tie to +EX) (Tie to –EX)
HBM (PLC/SBE) Red Black Green White Yellow (Tie to +EX) (Tie to –EX)
Interface Red Black Green White Bare (Tie to +EX) (Tie to –EX)
Kubota Red White Green Blue Yellow (Tie to +EX) (Tie to –EX)
LeBow Red Black Green White Bare (Tie to +EX) (Tie to –EX)
Mettler Toledo White Blue Green Black Orange Yellow Red
National Scale Green Black White Red Yellow (Tie to +EX) (Tie to –EX)
NCI Red Black White Green Bare Yellow Blue
Nikkei Red Black Green White Bare (Tie to +EX) (Tie to –EX)
Presage
Promotion Blue White Red Black Yellow (Tie to +EX) (Tie to –EX)
Philips Red Blue Green Gray Bare (Tie to +EX) (Tie to –EX)
Revere Green Black White Red Orange (Tie to +EX) (Tie to –EX)
Sensortronics Red Black Green White Bare (Tie to +EX) (Tie to –EX)
Sensortronics
60007 Green Black White Red Yellow (Tie to +EX) (Tie to –EX)
Strainsert Red Black Green white Bare (Tie to +EX) (Tie to –EX)
T-Hydronics Red Black Green White Bare (Tie to +EX) (Tie to –EX)
Tedea/Huntleigh Green Black Red White Bare Blue Brown
Thames Side Red Blue Green Yellow Bare (Tie to +EX) (Tie to –EX)
Toledo Green Black White Red Yellow (Tie to +EX) (Tie to –EX)
Totalcomp Red Black Green White Bare (Tie to +EX) (Tie to –EX)
Transducers Red Black Green White Orange (Tie to +EX) (Tie to –EX)