Loadstar Sensors DI-1000U Digital Load Cell Interface Manual - Manual (Page 24)

DI-1000 Di1000 User Guide
Page: 24 / 25
P/N : 033-01591 Rev. 6
Click Apply, OK and <ENTER> several times. You should get an “A” returned onscreen
for every <ENTER> pressed. You many now type ASCII commands to the DI-1000, to remotely
monitor and control the attached sensors.
You may press “?” at any time to see the available command list. Please continue at section
6.4 Continuation of the Quick Start
The quick start process continues the same as in section 3.7 above with the wired version. Please
continue there.