Brother DCP-110C - Manual (Page 101)

MAKING COPIES 9 - 7
6
Press Mono Start or Colour Start .
Setting paper type
If you are copying on special paper, be sure to select the type of
paper you are using so you will get the best print quality.
1
Press ( Copy ) to illuminate it in green.
2
Load your document.
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
Press Copy Options and ▲ or ▼ to select Paper Type .
Press Menu/Set .
5
Press ▲ or ▼ to select the type of paper you are using ( Plain ,
Inkjet , Glossy or Transparency ).
Press Menu/Set .
6
Press Mono Start or Colour Start .
Special Copy Options 2 in 1 (P), 2 in 1 (L), 4 in 1 (P), 4 in 1 (L)
or Poster are not available with Enlarge/Reduce.
You can change the default Paper Type setting at any time.
(See Setting the Paper Type on page 2-4.)