Brother DCP-110C - Manual (Page 85)

TAD (TELEPHONE ANSWERING DEVICE) 7 - 1
7
TAD mode
TAD mode allows you to store up to 99 incoming voice messages
that are a maximum of 3 minutes each in the memory. Voice
messages are stored on a “first-come, first-served” basis. You can
retrieve voice messages remotely. (See Remote Retrieval on page
6-4.)
You must record an outgoing message in order to use the TAD
mode. (See Recording TAD Outgoing Message on page 7-2.)
Setting up the TAD
You must set up the TAD in the following order:
1
Record TAD Outgoing Message (Msg Ctr OGM).
(See Recording TAD Outgoing Message on page 7-2.)
2
Press and hold until it lights to activate the TAD mode.
(See Activating TAD mode on page 7-3 and Message indicator
on page 7-3.)
TAD (Telephone Answering
Device)