Brother DCP-110C - Manual (Page 61)

SETUP RECEIVE 4 - 2
To select or change your Receive Mode
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu/Set , 0 , 1 .
3
Press ▲ or ▼ to select Fax Only ,
Fax/Tel , or Manual .
Press Menu/Set .
4
Press Stop/Exit .
Initial Setup
1.Receive Mode
Current Receive Mode
Fax : Fax Only
F/T : Fax/Tel
Mnl : Manual
MC : Msg Ctr
If the TAD Mode is On, it overrides
your Receive Mode setting. The
screen shows
MC:MSG CTR
Press and hold until it
lights.
OFF
If the TAD Mode is Off, the Receive
Mode returns to your own setting.
(See TAD (Telephone Answering
Device) on page 7-1.)