Brother DCP-110C - Manual (Page 118)

10 - 9 WALK-UP PHOTOCAPTURE CENTER ™
Changing the default settings
You can save the PhotoCapture Center
™
settings you use most often
by setting them as default. These settings will remain until you
change them again.
Increasing print speed or quality
1
Press Menu/Set , 4 , 1 .
2
Press ▲ or ▼ to select Normal or Photo .
Press Menu/Set .
3
Press Stop/Exit .
Setting the paper & size
1
Press Menu/Set , 4 , 2 .
2
Press ▲ or ▼ to select Letter Glossy , 10x15cm Glossy ,
13x18cm Glossy , A4 Glossy , Letter Plain , A4 Plain ,
Letter Inkjet , A4 Inkjet or 10x15cm Inkjet .
Press Menu/Set .
If you selected Letter or A4, press ▲ or ▼ to select the print size
( 10 x 8cm , 13 x 9cm , 15 x 10cm , 18 x 13cm , 20 x 15cm
or Max. Size ).
Press Menu/Set .
3
Press Stop/Exit .
Adjusting brightness
1
Press Menu/Set , 4 , 3 .
2
Press ▲ to make a lighter print.
—OR—
Press ▼ to make a darker print.
Press Menu/Set .
3
Press Stop/Exit .