Brother DCP-110C - Manual (Page 80)

6 - 3 REMOTE FAX OPTIONS
Turning off Remote Fax Options
If you set the Remote Fax Options to Off and there are faxes in your
machine’s memory, the LCD will give you two options.
■
If you press 1 , all unprinted faxes will be printed and erased
before the setting turns off. If a backup copy has already been
printed it will not be printed again.
■
If you press 2 , the memory will not be erased and the setting will
be unchanged.
(See Printing a fax from the memory on page 4-8.)
Setting your Remote Access Code
The remote access code lets you access the Remote Retrieval
features when you are away from your machine. Before you use the
remote access and retrieval features, you have to set up your own
code. The default code is inactive code (---
).
1
Press Menu/Set , 2 , 5 , 2 .
2
Enter a three-digit code using numbers 0 - 9 or .
Press Menu/Set . (The preset ‘ ’ cannot be changed.)
3
Press Stop/Exit .
Do not use the same code used for your Fax Receive Code
(
51 , 91 for New Zealand) or Telephone Answer Code
( # 51 , # 91 for New Zealand).
(See Operation from extension telephones on page A-14.)
You can change your code at any time by entering a new one.
If you want to make your code inactive, press
Stop/Exit in Step
2 to restore the inactive setting (--- ).