Brother DCP-110C - Manual (Page 44)

3 - 2 SETUP SEND
Speed-Dialling
Press Search/Speed Dial , # , and then the two digit Speed-Dial
number. (See Storing Speed-Dial numbers on page 5-1.)
Search
You can search for names you have stored in the Speed-Dial
memories. Press
Search/Speed Dial and the navigation keys to
search. (See Storing Speed-Dial numbers on page 5-1.)
* To search alphabetically, you can use the dial pad to enter the first
letter of the name you are looking for.
Fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause , and then press Mono Start or Colour Start to try
again. If you want to make a second call to the last number dialled,
you can save time by pressing
Redial/Pause and Mono Start or
Colour Start .
Redial/Pause only works if you dialled from the control panel.
If you are sending a fax automatically and the line is busy, the
machine will automatically redial up to three times at five minute
intervals.
If the LCD shows Not Registered when you enter the
Speed-Dial number, a number has not been stored for it.
two-digit number
To search alphabetically*
To search numerically
or