MBT Lighting LEDSMARTSCAN (SRS-7001) - Manual (Page 2)

Features
Voltage: AC120V 60Hz
High performance mobile DMX scanner with 1 x 30W LED source
8 Colors + White
8 Gobos + Spot
Separate Color & Gobo Wheels
8 DMX Channels
3-Button menu system LED Display making it easy to navigate
3 Operational modes: DMX controller, Master/Slave & Sound Active
Built-in lighting programs
Sound Active
Compact & portable design
Manual focusing lens
Gobo Shake effect
Strobe effect in every color
13-degree beam angle
DMX-512 protocol
Fan cooled
Hanging Bracket Included
Advantages of LED-technology: Extremely long life, low power
consumption, minimal heat emission,
Defacto maintenance free with brilliant light radiation
Master/Slave-operation
Function Display
MENU UP DOWN
Set the desired Master-mode for the master device, set the respective
Slave-mode for all slave devices.
Please note: The function G-3- is only meant for service purposes, please
do only use this function if you want to set the unit shortly into standby
mode.
Operation
After you connected the effect to the mains, the LED DMX scanner starts
running, during the reset, the motors are trimmed and the device is ready
for use afterwards.
Stand-Alone operation
In the stand-alone mode, the light can be used without controller. You can
do without a controller as this scanner features a built-in microphone,
which provides automatic sound control.
Master/slave operation
Connect the master and slave-devices and adjust the settings as
described above.
DMX-controlled operation
You can control the projectors individually via your DMX-controller.