MK Diamond MK-1503SS - Manual (Page 17)

17
For a mirror finish, make a paste of cerium oxide and water (or tin oxide and
water) apply the paste to a felt wheel and run the wheel against the surface using
only slight pressure. Once the paste dries, wash the surface with water and dry.
NOTE:
(A)
Clean using a damp cloth.
Dry when finished cleaning.
(A)
Using a flat blade screwdriver
remove the Motor Brush
Housing cover.
(B)
Remove the Motor Brush
Assembly.
(C)
Ensure the Motor Brush Housing
is free of all carbon pieces.
Cleaning
Motor Brush Change-Out
MK-1503SS MAINTENANCE