MTS Series FEC Environmental Chamber - Manual (Page 33)

Operation of Temperature Controller
Series FEC Environmental Chamber Product Manual Operation 33
E-STOP: The J1 connector should be connected to either J14 of the Frame
Controller or J2 of another Accessory with an Emergency Stop board.
The J2 connector will either have a jumper plug or be connected to J1
of another Accessory with an Emergency Stop board.
J1 E-STOP pin assignments are as follows:
P IN S IGNAL
1 ESTOP3B-
2 No Contact
3 No Contact
4 ESTOP_OUT_MONITOR+
5 ESTOPB_IN+
6 ESTOP3A-
7 ESTOPB_IN-
8 ESTOPA_IN+
9 ESTOP3B+
10 ESTOP_OUT_MONITOR-
11 No Contact
12 No Contact
13 ESTOPA_IN-
14 ESTOP3A+
15 No Contact