MTS Series FEC Environmental Chamber - Manual (Page 36)

Series FEC Environmental Chamber Product Manual 36
Temperature Controller Common Functions
Operation
3. Set heating and cooling parameters:
The temperature controller uses dual channels to control the temperature.
Channel 1 is the heating channel; channel 2 is the cooling channel. Relevant
parameters have been set at the factory; do not change the parameters. If
there are some abnormal phenomena, enter the following parameters to help
it return to normal state.
conF -insT -Act = rEu
conF -1A - Func = HEAt
conF -2A - Func = CooL
The following flow chart illustrates the method to set these parameters.
2 0 . 0
3 5 0 . 0
A C C S
L I S t c o d E
0
c o d E
1
c o d E
P A S S G o t o
F u L L
3 5 0 . 0
2 0 . 0
3 5 0 . 0
2 0 . 0 t d
6 0
t I
3 6 0
3 0
P b P I d
L I S t
3UHVV 
WLPHV WLPHV
3UHVV 
3UHVV  WLPHV
ZDLW 
VHFRQGV
3UHVV 
WLPHV
$IWHU )X// IODVKLQJ
SUHVV WR H[LW
SUHVV
FRQWLQXRXV SUHVV
WR ILQG 3
SUHVV
WR H[LW
SUHVV
WR ILQG ,
SUHVV
WR ILQG '
Setting PID Parameters