Hazard icons – MTS Acumen Electrodynamic Test System Load Frame User Guide User Manual
Page 22
Advertising
Location of Hex Bolt on Bottom of Crosshead
To adjust the crosshead manually:
1. Turn the left and right crosshead locks into the fully unlocked position.
2. Using a 10 mm socket wrench, turn the manual crosshead adjustment hex bolt counter-clockwise to raise
the crosshead, and turn it clockwise to lower the crosshead.
Hazard Icons
Following are the typical hazard icons used on MTS Acumen load frames.
Description
Item
Read manuals.
1
Crush point.
2
Tipping hazard.
3
22 MTS Acumen™ Electrodynamic Test System
Safety
Advertising